- Users Local time
- Today 8:19 PM
hello norbert,
when flying from LGPA to LGAV, i noticed the following:
the ACH3011 default route goes via VARIX.
but: all sids in the charts from LGPA to LGAV route via KEA (e.g.KEA1C),
and for all RWY 03x approaches in lgav traffic from the south is usually routed via KEA.
my filed plan was "PAO DCT VARIX"
and my updates flightplan finally was "KEA1C/35 PAO DCT VARIX", which is a little bit strange,
because first i was "cleared AS FILED to venizelos vie KEA1C ..." by LGGG_CTR, after change to LGAV-APP frequency i was immediately routed "direct KEA".
i needed no VARIX at all.
so IMHO a route like "PAO DCT KEA" would be better here.
regards,
stefan
when flying from LGPA to LGAV, i noticed the following:
the ACH3011 default route goes via VARIX.
but: all sids in the charts from LGPA to LGAV route via KEA (e.g.KEA1C),
and for all RWY 03x approaches in lgav traffic from the south is usually routed via KEA.
my filed plan was "PAO DCT VARIX"
and my updates flightplan finally was "KEA1C/35 PAO DCT VARIX", which is a little bit strange,
because first i was "cleared AS FILED to venizelos vie KEA1C ..." by LGGG_CTR, after change to LGAV-APP frequency i was immediately routed "direct KEA".
i needed no VARIX at all.
so IMHO a route like "PAO DCT KEA" would be better here.
regards,
stefan